Safety Regulations For loading arm Loading And Unloading Trucks

1. Strictly abide by safety regulations and shift handover system, and strictly prohibit non pump drivers from operating the crane pipe without permission to prevent accidents from happening;
2. Maintain close contact with other types of work and strictly prevent accidents such as oil leakage, spillage, and mixing;
3. During operation, it is strictly prohibited to wipe equipment, various tools, and other items, and not to place them on pumps and motors,
4. Report any abnormalities or malfunctions immediately and take measures with approval; Special circumstances can be reported after taking measures;
5. In case of sudden power outage, cut off the power supply and then close the valve;
6. Suspend work in case of thunderstorm weather.
Regulations for unloading liquefied gas crane pipes
1. The key points introduced are the safety operating procedures for unloading the crane tube of the tank truck during use.
2. After completing the unloading crane task, check the liquid level, pressure, temperature, and pipeline conditions of each storage tank to determine the unloading plan.
3. After the tank truck stops stably at the designated position on the unloading crane, turn off the engine and tighten the handbrake (if it is a slope, the tank truck tires still need to be padded with anti slip material)
Block), connecting the tank truck to the non unloading platform and the ground electrostatic magnet.
4. To connect the gas and liquid pipes of the tank car to the gas and liquid hoses of the unloading platform, open the gas phase emergency shut-off valve of the tank car, such as the gas phase valve.
5. Open the storage tank, unloading platform, or gas phase valve, and adjust the valve status to ensure that the gas phase of the storage tank is connected to the gas phase of the tank truck.
6. Start the compressor according to the operating procedures and extract the gas phase from the storage tank to boost the pressure of the tank car.