+8613503854331

How do the operating principles of top - loading and bottom - loading arms differ?

May 01, 2025

                             How do the operating principles of top - loading and bottom - loading arms differ?

 

photobank 1

 

 

Top - loading arms are designed to connect to the top openings of tanks, such as those on tank trucks or railcars.

When in operation, an operator positions the loading arm over the top opening of the tank. For non - hazardous or less - volatile substances, the connection may be a simple open - top connection. However, for more dangerous or volatile substances, a closed - top - loading system is used to prevent vapor emissions. The arm is extended and lowered into the tank, and the fluid is transferred through the arm. The operator can monitor the filling process from the top, and in some cases, may need to climb onto the tank for connection and disconnection.

Bottom - loading arms, on the other hand, are used to connect to the underside of tanks. This is especially common for ship loading and unloading, as well as some modern truck and railcar loading systems.

The bottom - loading arm has a long, articulated structure that can be stored in a near - vertical position when not in use. When loading, the arm is extended horizontally and then connected to the bottom inlet of the tank. Since the operation is usually done at ground level, it is safer for the operator. Bottom - loading is a closed - system operation, which allows for vapor recovery. The fluid flows into the tank from the bottom, reducing the risk of static electricity build - up caused by free - falling liquid, and also enabling higher flow rates and shorter loading times.

 

Send Inquiry