Submersible Pump

Submersible Turbine Pumps are a type of pump used for a variety of applications, primarily in the petroleum industry. These pumps are designed to be submerged in the fluid they are pumping, typically in underground storage tanks or wells.

The basic components of the Red Jack submersible oil pump include the pump head, connecting pipe, and pump tail. The pump head includes the power supply connection compartment, electric bridge, capacitor compartment, exhaust threaded plug, check valve, pressure regulation component, exhaust and pressure testing interface, optional oil pipe inlet, wire entry port, oil outlet port, and pump support pipe port. The connecting pipe can be classified as a fixed pipe type and a Quickset expanding type. The fixed pipe type consists of the oil pipe, return air pipe, wire pipe, and pump wire. The expanding type consists of the oil pipe, return air pipe, wire pipe, adjusting nut, and expanding pump wire. The pump tail is composed of the motor and centrifugal pump. The motor is connected to the electrical connector, overheating protector, and oil channel. The centrifugal pump consists of the oil inlet cover, anti-static component, impeller, and pump shaft.

Product advantages:

1. Easy installation and maintenance; low noise and long service life.

2. Built-in check valve, switch valve and safety valve; vacuum valve can carry multiple refueling guns to refuel at the same time.

3. Suitable for gasoline, kerosene, diesel, etc.

4. Can prevent oil gasification and avoid the phenomenon of not being able to draw oil; can transport oil over a longer distance than self-priming oil pumps.

Feature:

1. High flow rate

2. Large flow volume

3. Low energy consumption

4. Integrated design of pump head

Fuel Compatibility:

· 100% Diesel

· 100% Gasoline

· Methanol concentrations up to 20%

· Ethanol concentrations up to 20%

· MTBE, ETBE, or TAME concentrations up to 20%

4 Motor Sizes Available:

· 3/4 HP, 60 HZ, 1-phase

· 1 1/2 HP, 60 HZ, 1-phase

· X3 1 1/2 HP, 60 HZ, 1-phase, high pressure

· 2 HP, 60 HZ, 1-phase

1. Junction box

2. 2-inch oil outlet pipe

3. Pump's built-in riser diameter is 4mm and height is 200mm

4. Tank's riser

5. Power cord conduit

6. Manhole

7. Oil tank

Hot Tags: submersible pump, China submersible pump manufacturers, suppliers, factory, Portable Fuel Pump, Mobile Vane Pump, Manual Rotary Hand Pump, Level Hand Pump, Fuel Transfer Pump, Electric Transfer Pump Kit